Ublox SARA-R4 Series - Page 114

SARA-R4/N4 series-AT Commands Manual
UBX-17003787 - R09

11SIM management
Page 114 of 307
Parameter Type Description
• 13: CSD call active, (U)SIM toolkit REFRESH proactive command delayed till call
release
11.3.4Notes
• <state>=9 and 10 will not be reported when dedicated (+CFUN=6) or raw (+CFUN=9) mode is active.
• Table 9 provides the meaning of each bit with the corresponding state:
Bit States reported
0 Reports the (U)SIM initialization status (<state>'s from 0 to 6 may be reported)
1 Reports the (U)SIM phonebook initialization status (<state>'s from 7 to 8 may be reported)
2 Reports the (U)SIM toolkit REFRESH proactive command execution result (<state>'s from 9 to 13 may be
reported)
Table 9: <mode> bitmask meaning