12
xArm Motion Parameters
The parameters of the robotic arm are shown in Table 1.1 and Table 1.2.
Table 1.1 working range of each joint of the robotic arm
Table 1.2 range of various motion parameters of the robotic arm
Note:
1. In the TCP motion (Cartesian space motion) commands (set_position () function
of the SDK), If a motion command involves both position transformation and
attitude transformation, the attitude rotation speed is generally calculated
automatically by the system. In this situation, the specified speed parameter is the
maximum linear speed, range from: 0 ～ 1000mm / s.
2. When the expected TCP motion only changes the attitude (roll, pitch, yaw), with
To Next Page
Loading...
Need help?
General
