UTG9000T Series Function Abitrary Waveform Generator
102
modulation wave. The carrier wave width changed by the modulation wave amplitude. The
modulation modes for each channel are independent, it can set the same or different modulation
modes to each channel.
Select PWM modulation
Tap CH1→Modulate→PWM to turn on PWM modulation, the instrument output the moduluated
waveform according to the current setting of the modulation wave and the carrier wave.
Select the carrier waveform
PWM carrier waveform can only be pulse wave. After select PWM modulation, tap Base to present
the carrier waveform on the right side.
Carrier wave frequency settings
Refer to The carrier wave frequency settings of AM modulation.
To Next Page
Loading...
Need help?
General
