UTG9000T Series Function Abitrary Waveform Generator
5
UTG9000T Series Function/Arbitrary
Waveform Generator
This product has DDS (direct digital fraquency synthesis) function, it can present high precision,
stable, pure and low distortion signal.Plus, it can also offer wave in high frequeny with quick rising
edge and falling edge. It is a high-performance, multifunction four channel arbitrary function
generator. Convience touch screen, superior technical index and humanity graph display design
for your better work performance. This product is a multi-purpose generator to meet your current
and future testing needs.
Features
Standard four channel with separate output channel mode
Nine carrier waves: sine wave, square wave, ramp wave, pulse wave, harmonic wave,
noise, PRBS (pseudo random binary sequence), DC, arbitrary wave
The maximum sampling rate 2.5GSa/s, the vertical resolution 16bits
Adjustable noise bandwidth
Sine wave output: 600MHz/400MHz/200MHz, full-band: 1μHz
Square wave output: 200MHz/160MHz/120MHz, the minimum edge time: within 1.5ns,
adjustable duty ratio
Pulse wave output: 200MHz/160MHz/120MHz, wide dynamic range high precise adjustable
rising/falling edge time, adjustable duty ratio
It can output phase and amplititude, independent and adjustable 2~16 hamronic wave
The maximum output swing: 20Vpp
It can output arbitrary wave 8pts～64Mpts, offer point-by-point, over 200 sets non - volatile
digital arbitrary wave storage
It can store 16GB（opional）or 20MB arbitrary file（.bsv or.csv）, the instrument status file
It can read arbitrary wave file（.bsv or.csv）and the instrument file storage in USB
Abundant modulation types: AM、FM、PM、DSB-AM、QAM、ASK、FSK、3FSK、4FSK、
PSK、BPSK、QPSK、OSK、PWM、SUM
Linear sweep, logarithmic sweep, list frequency sweep, stepping frequency sweep
Offer frequency sweep and burst (pulse string) output
Digital protocol output：SPI、IIC、UART
SNR(signal to noise ratio) one-click output
To Next Page
Loading...
Need help?
General
