UniPOS FS5200E - Page 53

UniPOS Fire Extinguishing Control Panel FS5200Е
Instruction Manual Page 53
Revision 7/06.12 of 63
13.4.2.6.3.1. ON/OFF Remote input.
Admissible values of the parameter are : ''On''
and ''Off''
Аctive buttons :
 to change – buttons and ;
 to save the change – button
(„Мenu”);
 to exit - button („Exit”).
1 2 3
13.4.2.6.3.2. Address of the Remote Panel,
where the device FD7203 is situated.
Admissible values of the parameter are :
01÷31(i.e the addresses of Control Panels in
the network.
Аctive buttons :
 to change – buttons and
;
 to save the change – button
(„Меnu”);
 to exit - button („Exit”).
1 2 3
13.4.2.6.3.3. Number of a loop where the
FD7203 device is situated.
Admissible values of the parametre are 01
and 02.
Аctive buttons :
 to change – buttons and ;
 to save the change – button
(„Мenu”);
 to exit - button („Exit”).
1 2 3