10
• DO NOT OPERATE THE LASER SYSTEM IF ANY SAFETY FEATURES HAVE BEEN MODIFIED, DISABLED OR
REMOVED. This may lead to accidental exposure to invisible CO
2
laser radiation which may cause severe
eye damage and/or severe burns to your skin.
• Always use caution when operating a laser system.
*An enclosure which does not permit human access to laser radiation in excess of the accessible emission limits
of Class 1 for the applicable wavelength and emission duration.
Tamper Proof Labels
All laser cartridges are equipped with tamper-proof labels. There are NO field serviceable parts inside a
Universal Laser System, Inc. (ULS) laser cartridge. If your laser cartridge needs service, please contact the
Customer Service Team at support@ulsinc.com
.
Safety Labels
CDRH and CE regulations require that all laser manufacturers affix warning labels in specific locations throughout
the equipment. The following warning labels are placed on the laser system for your safety. Do not remove
these labels for any reason. If the labels become damaged or have been removed for any reason, do not operate
the laser system and immediately contact Universal Laser Systems, Inc. at support@ulsinc.com
for a free
replacement.
ULS CO
2
Laser Source Labels
To Next Page
Loading...
