14
EU Declaration of Conformity
EU Declaration of Conformity
Product Identification: ALL VLS\PLS\ILS Models and Accessories
Manufacturer: Authorized Representative:
Universal Laser Systems, Inc. Universal Laser Systems GmbH
16008 N. 81
st
St. Lerchenfelder Guertel 43
Scottsdale, AZ 85260 A-1160 Vienna/Austria
USA
The manufacturer hereby declares that the equipment specified below is in conformity with
the following directives:
2014/30/EU (EMC Directive)
2014/35/EU (Low Voltage Directive)
2006/42/EC (Machinery Directive)
2015/863/EU (2011/65/EU ROHS2 Amended)
2012/19/EU (WEEE Directive)
based on the standards listed.
Standards Used:
Safety:
EN 60950-1: 2013
EN 60825-1: 2014 (Class 2)
EMC:
EN 55024 2010 (Class A)
EN 55022: 2010 (Class A)
EN 61000-3-2: 2006 (class A)
EN 61000-3-3: 2008
EN 61000-4-2: 2008 (4kV CD, 8kV AD)
EN 61000-4-3: 2006 (3 or 10 V/m)
EN 61000-4-4: 2012 (1 or 2 kV power line)
EN 61000-4-5: 2014 (class 3)
EN 61000-4-6: 2013 (3 or 10Vrms)
EN 61000-4-8: 2009
EN 61000-4-11:2004
Warning: This is a Class A product. In a domestic environment, this product may cause radio interference in
which case the user may be required to take adequate measures.
To Next Page
Loading...
