15.2 Update Robot
15.2 Update Robot
Software updates can be installed from USB flash memory. Insert an USB memory stick and click
Search to list its contents. To perform an update, select a file, click Update, and follow the on-screen
instructions.
WARNING:
Always check your programs after a software upgrade. The upgrade
might change trajectories in your program. The updated software
specifications can be found by pushing the “?” button located at the
top right corner of the GUI. Hardware specifications remain the same
and can be found in the original manual.
Version 3.10
Copyright © 2009–2019 by Universal Robots A/S. All rights reserved.
II-121 CB3
To Next Page
Loading...
Need help?
General
