B.1 EU Declaration of Incorporation in accordance with ISO/IEC 17050-1:2010
Reference to Harmonized Standards Used:
(I) EN ISO 10218-1:2011 as ap-
plicable
(I) EN ISO 13849-2:2012 (II) EN 60664-1:2007
(I) EN ISO 12100:2010 (I) EN ISO 13850:2015 (II) EN 60947-5-5:1997/
A11:2013
(I) EN ISO 13732-1:2008 (I) EN 1037:1995+A1:2008 (II) EN 61000-6-2:2005
(I) EN ISO 13849-1:2008 & 2015* (II) EN 60204-1:2006/ A1:2010 (III)EN 61000-6-4:2007/
A1:2011
*Note: From the 2008 to the 2015 (I) EN ISO 13850:2015 (III)EN 61131-2:2007
editions, there are no changes (II) EN 60320-1:2001/ A1:2007 (II) EN 61140:2002/
A1:2006
relevant to our robots TUV Nord (II) EN 60529:1991/ A2:2013
Certificate 4478014097602
Reference to Other Technical Standards and Specifications Used:
(I) ISO 9409-1:20047 (III) IEC 60068-2-27:2008 (II) IEC 61784-3:2010 [SIL2]
(I) ISO/TS 15066 as applicable (III) IEC 60068-2-64:2008 ISO 14664-1:2015 Class 5
for
(III) IEC 60068-2-1:2007 (II) IEC 60664-5:2007 control assembly with en-
closure
(III) IEC 60068-2-2:2007 (III) IEC 61326-3-1:2008 and Class 5 for UR3, UR5
and UR10 manipulators
The manufacturer, or his authorised representative, shall transmit relevant information
about the partly completed machinery in response to a reasoned request by the
national authorities.
Approval of full quality assurance system (ISO 9001), by the notified body
Bureau Veritas, certificate #DK008850.
UR3/CB3 I-60 Version 3.10
Copyright © 2009–2019 by Universal Robots A/S. All rights reserved.
To Next Page
Loading...
