11.4 Welcome Screen
11.4 Welcome Screen
After booting up the controller PC, the welcome screen is shown. The screen offers the following
options:
• Run Program: Choose and run an existing program. This is the simplest way to operate the
robot arm and control box.
• Program Robot: Change a program, or create a new program.
• Setup Robot: Change the language, set passwords, upgrade software, etc.
• Shutdown Robot: Powers off the robot arm and shuts down the control box.
• About: Provides details related to software versions, hostname, IP address, serial number and
legal information.
CB3 II-30 Version 3.10
Copyright © 2009–2019 by Universal Robots A/S. All rights reserved.
To Next Page
Loading...
