B Declarations and Certificates
B.1 EU Declaration of Incorporation in accordance with ISO/IEC 17050-
1:2010
Manufacturer: Person in the Community Authorized to Compile the
Technical File:
Universal Robots A/S David Brandt
Energivej 25 Technology Officer, R&D
DK-5260 Odense S Denmark Universal Robots A/S
Energivej 25, DK-5260 Odense S
Description and Identification of the Partially-Completed Machine(s):
Product and Function: Industrial robot (multi-axis manipulator with Control
Box and Teach Pendant). Function is determined by the
completed
machine (with end-effector and intended use).
Model: UR3, UR5, UR10 with CB3 control box (UR3/CB3,
UR5/CB3, UR10/CB3)
Serial Number: Starting 20183000000 and higher — Effective 1 January
2018
Incorporation: Universal Robots (UR3, UR5, and UR10) shall only be
put into service upon being integrated into a final com-
plete machine
(robot system, cell or application), which conforms with
the provisions of the Machinery Directive and other ap-
plicable Directives.
It is declared that the above products, for what is supplied, fulfil the following Directives as Detailed Below:
I Machinery Directive 2006/42/EC — The following essential requirements have been fulfilled: 1.1.2,
1.1.3, 1.1.5, 1.2.1, 1.2.4.3, 1.2.6, 1.3.4, 1.3.8.1, 1.5.1, 1.5.2, 1.5.6, 1.5.10, 1.6.3, 1.7.2, 1.7.4, 4.1.2.3 It is declared
that the relevant technical documentation has been compiled in accordance with Part B of Annex VII of
the Machinery Directive.
II Low-voltage Directive 2014/35/EU — Reference the LVD and the harmonized standards used below.
III EMC Directive 2014/30/EU — Reference the EMC Directive and the harmonized standards used below.
IV RoHS Directive 2011/65/EU — Reference the RoHS Directive 2011/65/EU
V WEEE Directive 2012/19/EU — Reference th WEEE Directive 2012/19/EU
Version 3.10
Copyright © 2009–2019 by Universal Robots A/S. All rights reserved.
I-59 UR3/CB3
To Next Page
Loading...
Need help?
General
