15.3 Set Password
15.3 Set Password
Two passwords are supported. The first is an optional System password which prevents unautho-
rized modification of the setup of the robot. When the System password is set, programs can be
loaded and executed without the password, but the user must enter the correct password in order
to create or change programs.
The second is a required Safety password which must be entered correctly in order to modify the
safety configuration.
NOTE:
In order to change the safety configuration, the Safety password must
be set.
WARNING:
Add a System password to prevent non-authorized personnel from
changing the robot installation.
CB3 II-122 Version 3.10
Copyright © 2009–2019 by Universal Robots A/S. All rights reserved.
To Next Page
Loading...
Need help?
General
