Troubleshooting
12-6
Skewed-color
printout.
— Run [Calibration]. 9-73
— Run [Color Registration]. 9-70
Print on the back of
the sheet is visible on
the front.
— Set [Prevent Bleed-through] to
[On].
4-40
6-24
9-22
Perform Tone Curve
Adjustment is
displayed.
Over long periods of use, the
effects of the ambient
temperature and humidity
can cause color output hues
to vary slightly.
Run [Tone Curve Adjustment]. 9-73
The color toner is
empty.
Do you want to continue
printing in black and white?
If the black toner is remained, the
machine continues printing in black
and white by selecting [Print in
Black and White] of Color Toner
Empty Action.
9-16
The machine makes a
clicking sound before
starting to print or
after printing.
— The machine is adjusting itself. It is
not a machine failure.
—
The previous image
remains and lightly
printed.
— Run [Drum Refresh]. 9-68
— Contact your service
representative.
—
Irregular horizontal
lines appear in the
image.
— Contact your service
representative.
—
Symptom Checkpoints Corrective Actions
Reference
Page
To Next Page
Loading...
