Troubleshooting
12-12
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
Message Checkpoints Corrective Actions
Reference
Page
Memory is full.* — The memory is full and the job cannot
be continued. Press [Continue] to
print the scanned pages. The print
job cannot be processed completely.
Press [Cancel] to cancel the job.
—
Is [End] displayed on the
touch panel?
The process cannot be performed
due to insufficient memory. If only
[End] is available, press [End]. The
job will be canceled.
—
Paper left. — Remove paper from the document
finisher.
—
Paper jam. —
If a paper jam occurs, the machine will
stop and the location of the jam will be
indicated on the touch panel. Leave the
machine on and follow the instructions
to remove the jammed paper.
12-18
Performing Drum
Refresh…
— The machine is under the adjustment
to maintain its quality. Please wait.
—
Preparing to print. —
The machine is under the adjustment
to maintain its quality. Please wait.
—
Regulating the
temperature…
—
The machine is under the adjustment
to maintain its quality. Please wait.
—
Removable memory
error.*
Is writing to a removable
memory prohibited?
An error occurred in the removable
memory. The job stopped. Press
[End].
Possible error codes are as follows:
01: Connect a removable memory
that can be written to.
—
—
An error occurred in the removable
memory. The job stopped. Press
[End].
Possible error codes are as follows:
01:
The amount of data that can be
saved at once has been exceeded.
Restart the system or turn the
power OFF/ON. If the error still
occurs, the removable memory is
not compatible with the machine.
Use the removable memory
formatted by this machine. If the
removable memory cannot be
formatted, it is damaged. Connect
a compatible removable memory.
7-22
To Next Page
Loading...
