Section
Item
Maintenance item contents
Initial
No. setting*
2DA/2DB-1
1-4-4
U344 Setting preheat/energy saver mode Inch
specifications:
ENERGY STAR
Metric
specifications:
GEEA
U345 Setting the value for maintenance due indication —
U402 Adjusting margins of image printing 3.0/3.0/4.0
U403 Adjusting margins for scanning an original on the contact glass 2.0/3.0/2.0/2.0
U404 Adjusting margins for scanning an original from the DP 2.0/3.0/2.0/2.0
U407 Adjusting the leading edge registration for memory image printing 0.0
U504 Initializing the scanner NIC —
U506 Setting the time out 10
U901 Checking/clearing copy counts by paper feed locations —
U903 Checking/clearing the paper jam counts —
U904 Checking/clearing the service call counts —
U905 Checking counts by optional devices —
U906 Resetting partial operation control —
U908 Changing the total counter value —
U910 Clearing the black ratio data —
U911 Checking/clearing copy counts by paper sizes —
U917 Setting backup data reading/writing —
U920 Checking the accounting counts —
U925 Checking/clearing the system error counts —
U926 Rewriting FAX program —
U927 Clearing the all accounting counts and machine life counts —
U928 Checking machine life counts —
U941 Setting the default magnification ratio of the default drawer —
U942 Adjusting the DP amount of slack in the original 0
U990 Checking/clearing the time for the exposure lamp to light —
U991 Checking the scanner count —
U993 Outputting a VTC-PG pattern —
* Initial setting for executing maintenance item U020
Mode setting
Image
processing
Network
scanner
Others
To Next Page
