Vacon 100X series - Page 43

User Interfaces vacon • 40
Service support: find your nearest Vacon service center at www.vacon.com
4
4.3.4.4 Total counters
Table 12. Diagnostics menu, Total counters parameters
Code Parameter Min Max Unit Default ID Description
V4.4.1 Energy counter Varies 2291
Amount of energy taken from
supply network. No reset.
NOTE FOR TEXT KEYPAD:
The highest energy unit
shown on the standard key-
pad is MW. Should the
counted energy exceed 999.9
MW, no unit is shown on the
keypad.
V4.4.3
Operating time
(graphical keypad)
a d hh:min 2298 Control unit operating time
V4.4.4
Operating time
(text keypad)
a
Control unit operating time in
total years
V4.4.5
Operating time
(text keypad)
d
Control unit operating time in
total days
V4.4.6
Operating time
(text keypad)
hh:min:ss
Control unit operating time in
hours, minutes and seconds
V4.4.7
Run time
(graphical keypad)
a d hh:min 2293 Motor running time
V4.4.8
Run time
(text keypad)
a
Motor running time in total
years
V4.4.9
Run time
(text keypad)
d
Motor running time in total
days
V4.4.10
Run time
(text keypad)
hh:min:ss
Motor running time in hours,
minutes and seconds
V4.4.11
Power on time
(graphical keypad)
a d hh:min 2294
Amount of time the power
unit has been powered so far.
No reset.
V4.4.12
Power on time
(text keypad)
a Power on time in total years
V4.4.13
Power on time
(text keypad)
d Power on time in total days
V4.4.14
Power on time
(text keypad)
hh:min:ss
Power on time in hours, min-
utes and seconds
V4.4.15
Start command
counter
2295
The number of times the
power unit has been started.