Vacon 100X series - Press.loss.comp

vacon • 147 Parameters
6
6.2.20 Press.Loss.Comp
Figure 54. Position of pressure sensor
If pressurizing a long pipe with many outlets, the best place for the sensor would probably be
halfway down the pipe (Position 2). However, sensors might, for example, be placed directly af-
ter the pump. This will give the right pressure directly after the pump, but farther down in the
pipe the pressure will drop depending on the flow.
PT PT
9101.emf
Pressure
No flow
W
i
t
h
f
l
o
w
Pipe length
Position 1 Position 2