Vacon 100X series - User Settings

User Interfaces vacon • 52
Service support: find your nearest Vacon service center at www.vacon.com
4
4.3.6 User settings
4.3.6.1
Parameter backup
Table 28. User settings menu, General settings
Code Parameter Min Max Unit Default ID Description
P6.1 Language selections Varies Varies Varies 802
Depends on language pack-
age.
P6.2 Application selection 801
M6.5 Parameter backup See chapter 4.3.6.1 below.
P6.7 Drive name Give name of drive if needed.
Table 29. User settings menu, Parameter backup parameters
Code Parameter Min Max Unit Default ID Description
P6.5.1
Restore factory
defaults
831
Restores default parameter
values and initiates the
Startup Wizard when acti-
vated
P6.5.2
Save to keypad
*
*. Only available with graphical keypad
01 0
Save parameter values to
keypad to e.g. copy them to
another drive.
0 = No
1 = Yes
P6.5.3 Restore from keypad*
Load parameter values from
keypad to the drive.
B6.5.4 Save to Set 1
Store a customised parame-
ter set (all parameters
included in the application)
B6.5.5 Restore from Set 1
Load the customised param-
eter set to the drive.
B6.5.6 Save to Set 2
Store another customised
parameter set (all parame-
ters included in the applica-
tion)
B6.5.7 Restore from Set 2
Load the customised param-
eter set 2 to the drive.