Vacon 100X series - Favorites; User Levels

4
vacon • 53 User Interfaces
4.3.7 Favorites
NOTE: This menu is not available in text keypad.
Favorites are typically used to collect a set of parameters or monitoring signals from any of the
keypad menus. You can add items or parameters to the Favorites folder, see chapter .
To remove an item or a parameter from the Favorites folder, do the following:
4.3.8 User levels
User level parameters are intended to restrict the visibility of parameters and to prevent un-
authorized and inadvertent parameterization on the keypad.
Table 30. User level parameters
Code Parameter Min Max Unit Default ID Description
P8.1 User level 1 3 1 1194
1 = Normal; All menus visible
in the Main menu
2 = Monitoring; Only Monitor,
Favorites and User Levels
menus are visible in the main
menu
3 = Favorites; Only Favorites
and User Levels menus are
visible in the Main menu
P8.2 Access code 0 99999 0 2362
If set to other value than 0
before switching to monitor-
ing when e.g. user level Nor-
mal is active, the access
code will be asked when try-
ing to switch back to Nor-
mal. Can therefore be used
to prevent unauthorized
parameterization on the key-
pad.

Motor Nom Freq
50.00 Hz
Favorites
STOP READY I/O

Help
Motor Nom Freq
STOP READY I/O
Monitor
Rem from favorites
OK OK
9172.emf
STOP READY KeypadALARM

ID:2362 P8.2
User levels
User level
Normal
Access code
00000
STOP READY I/OALARM
00000
Min:0
Max:9
ID:2362 P8.2
Access code
OK
9173.emf