Vacon 100X series - I;O

Monitoring Menu vacon • 60
Service support: find your nearest Vacon service center at www.vacon.com
5
5.1.4 I/O
Table 36. I/O signal monitoring
Code Monitoring value Unit Scale ID Description
V2.4.1 Slot A DIN 1, 2, 3 1 15
Shows the status of digital inputs 1-3 in slot
A (standard I/O)
V2.4.2 Slot A DIN 4, 5, 6 1 16
Shows the status of digital inputs 4-6 in slot
A (standard I/O)
V2.4.3 Slot B RO 1, 2, 3 1 17 Shows the status of relay inputs 1-3 in slot B
V2.4.4 Analogue input 1 % 0.01 59
Input signal in percent of used range. Slot
A.1 as default.
V2.4.5 Analogue input 2 % 0.01 60
Input signal in percent of used range. Slot
A.2 as default.
V2.4.6 Analogue input 3 % 0.01 61
Input signal in percent of used range. Slot
D.1 as default.
V2.4.7 Analogue input 4 % 0.01 62
Input signal in percent of used range. Slot
D.2 as default.
V2.4.8 Analogue input 5 % 0.01 75
Input signal in percent of used range. Slot
E.1 as default.
V2.4.9 Analogue input 6 % 0.01 76
Input signal in percent of used range. Slot
E.2 as default.
V2.4.10 Slot A AO1 % 0.01 81
Analog output signal in percent of used
range. Slot A (standard I/O)