Vacon 100X series - Page 61

Monitoring Menu vacon • 58
Service support: find your nearest Vacon service center at www.vacon.com
5
Table 34. Trend curve parameters
Code Parameter Min Max Unit Default ID Description
M2.2.1 View Trend curve
Enter this menu to select and
monitor values for viewing in
curve form.
P2.2.2 Sampling interval 100 432000 ms 100 2368
Set here the sampling inter-
val.
P2.2.3 Channel 1 min -214748 1000 -1000 2369
Used by default for scaling.
Adjustments might be neces-
sary.
P2.2.4 Channel 1 max -1000 214748 1000 2370
Used by default for scaling.
Adjustments might be neces-
sary.
P2.2.5 Channel 2 min -214748 1000 -1000 2371
Used by default for scaling.
Adjustments might be neces-
sary.
P2.2.6 Channel 2 max -1000 214748 1000 2372
Used by default for scaling.
Adjustments might be neces-
sary.
P2.2.7 Autoscale 0 1 0 2373
The selected signal is auto-
matically scaled between
min and max values if this
parameter is given value 1.
9251.emf
OK