Vacon 100X series - Page 85

Parameters vacon • 82
Service support: find your nearest Vacon service center at www.vacon.com
6
Group 3.5.2.4: Analog Input 4
Group 3.5.2.5: Analog Input 5
Group 3.5.2.6: Analog Input 6
Table 63. Analogue input 4 settings
Code Parameter Min Max Unit Default ID Description
P3.5.2.4.1 AI4 signal selection
AnIN
SlotD.2
152 See P3.5.2.1.1.
P3.5.2.4.2 AI4 signal filter time 0.00 300.00 s 0.1 153 See P3.5.2.1.2.
P3.5.2.4.3 AI4 signal range 0 1 0 154 See P3.5.2.1.3
P3.5.2.4.4 AI4 custom. min -160.00 160.00 % 0.00 155 See P3.5.2.1.4.
P3.5.2.4.5 AI4 custom. max -160.00 160.00 % 100.00 156 See P3.5.2.1.5.
P3.5.2.4.6 AI4 signal inversion 0 1 0 162 See P3.5.2.1.6.
Table 64. Analogue input 5 settings
Code Parameter Min Max Unit Default ID Description
P3.5.2.5.1 AI5 signal selection
AnIN
SlotE.1
188 See P3.5.2.1.1.
P3.5.2.5.2 AI5 signal filter time 0.00 300.00 s 0.1 189 See P3.5.2.1.2.
P3.5.2.5.3 AI5 signal range 0 1 0 190 See P3.5.2.1.3
P3.5.2.5.4 AI5 custom. min -160.00 160.00 % 0.00 191 See P3.5.2.1.4.
P3.5.2.5.5 AI5 custom. max -160.00 160.00 % 100.00 192 See P3.5.2.1.5.
P3.5.2.5.6 AI5 signal inversion 0 1 0 198 See P3.5.2.1.6.
Table 65. Analogue input 6 settings
Code Parameter Min Max Unit Default ID Description
P3.5.2.6.1 AI6 signal selection
AnIN
SlotE.2
199 See P3.5.2.1.1.
P3.5.2.6.2 AI6 signal filter time 0.00 300.00 s 0.1 200 See P3.5.2.1.2.
P3.5.2.6.3 AI6 signal range 0 1 0 201 See P3.5.2.1.3
P3.5.2.6.4 AI6 custom. min -160.00 160.00 % 0.00 202 See P3.5.2.1.4.
P3.5.2.6.5 AI6 custom. max -160.00 160.00 % 100.00 203 See P3.5.2.1.5.
P3.5.2.6.6 AI6 signal inversion 0 1 0 209 See P3.5.2.1.6.