J. Specifications
---105---
18.4-34, 18.4R34, 460/85R34, 520/70R34, 230/95R48
(dynamic rolling radius R = 770 mm)
Base gear
Overdrive
r/min
540E 540 1000
r/min
540E 540 1000
r/min
1594 1890 2074
r/min
1594 1890 2074
L 1 2.6 3.0 3.3 OR+L 1 2.9 3.5 3.8
L 2 3.5 4.2 4.6 OR+L 2 4.0 4.8 5.3
L 3 5.5 6.6 7.2 OR+L 3 6.4 7.5 8.3
L 4 7.3 8.7 9.5 OR+L 4 8.4 10.0 11.0
H 1 8.9 10.5 11.5 OR+H 1 10.2 12.1 13.2
H 2 12.1 14.4 15.8 OR+H 2 14.0 16.6 18.2
H 3 19.1 22.7 24.9 OR+H 3 22.0 26.1 18.2
H 4 25.4 30.1 33.0 OR+H 4 29.1 34.6 37.9
J 7.4.2. Power take---off output
Tractor 600 700 800 900
Max. power take---off output (kW), at nominal revs of 540
r/min (engine speed 1890 r/min)
36 44.5 49.5 54
Max. power take---off output (kW), at nominal revs of 1000
r/min (engine speed 2074 r/min)
37.5 46.5 51.5 58
J 7.5. Powered front axle
Differential brake automatic differential brake. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Overall reduction 15.76. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ratio front axle/rear axle 1.342. . . . . . . . . . . . . . . . . . . . . . . . . . .
Oil volume in differential 6.5 l. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Oil volume in hubs 2 x 0.8 l. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flange distance, front axle 4WD 1580 mm. . . . . . . . . . . . . . . . . . . . .
Steering angle, adjustable stepless adjustment max 55_. . . . . . . . . . . . . . . . . . . . . . . . . .
Pivoting ±13.5_. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Camber 1_. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
King pin inclination 5_. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Caster 0_. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Toe---in 0---2 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
For oil volumes and qualities, see table on page 63.
J 7.6. 2WD axle
Construction beam design. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pivoting ±13_. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Camber 2_. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
King pin inclination 8_. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Caster 0_. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flange distance, front axle 2WD 1390, 1490, 1590. . . . . . . . . . . . . . . . . . . . .
Toe---in 2---6 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
J 8. Brakes
Type disc brakes of multi---disc type running in oil. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
No. of brake discs 4+4 kpl. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Friction area 2950 cm
2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pedal free travel 50 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Parking brake mechanically operated, acting on running brakes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
J 9. Steering system
Hydrostatic steering with separate pump or oil supply from hydraulic main pumps via priority valve.
Steering cylinder 2---side piston. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .