---45---
D. Instruments and controls
D 2.7. Roof console
1
2
3
4
a
69---33,1
D 2.7.1. Recirculation control knob (1)
(extra equipment, with air conditioning)
On the front part of the roof console there is an adjustable
control knob for air recirculation. Turning this knob
clockwise progressively closes the air inlet from outside.
With the knob in this position:
--- The cab will heat up faster
--- The heating capacity will be higher
--- Higher cooling capacity with air conditioning.
With the knob in this position:
--- The windows will demist faster (reduces humidity/ice
forming)
--- The pressure in the cab will be higher (reduces dust
quantity)
D 2.7.2. Roof fan (2)
(3---speeds, extra equipment)
This fan blows air through the ventilation nozzles in the
roof console, the amount of heat can be adjusted with the
heater control knop (a), see page 34.
D 2.7.3. Air conditioning control knob (3)
(extra equipment)
Air conditioning see page 125.
D 2.7.4. Ventilation nozzles (4)
(extra equipment, with roof fan)
In the upper part of the cab there are three nozzles which
can be turned to the desired direction. The window
surfaces can be cleared of ice or condensation by turning
the nozzles towards the glass.
To Next Page
Loading...
