J. Specifications
---98---
J 3.2. Tyre/tire pressures and permissible loadings (30 km/h, R tyres/tires 40 km/h)
Rear wheels
Pressure
(kPa)
Max. load per
tyre/tire (kg)
Front wheels Pressure
Max. load per
tyre/tire (kg)
16.9---30/8
170
2300 10.00---16/8 280 1190
16.9R30/8 160 2300 10.50---18/10 330 1605
18.4R30/8 160 2650 11.00---16/8 160 1320
30
160 2575 12.4R24/8 160 1360
16.9---34/8 170 2380 13.6R24 160 1450
16.9R34/8 160 2430 13.6---24/8 200 1545
18.4R34 160 2800 14.9R24 160 1700
18.4---34/8 140 2565 14.9---24/8 180 1760
420/85R34
160
2650
24
60 990
13.6---38/8
200
1950 12.4R28 160 1450
13.6R38/8 160 1800 230/95R32 320 2000
14.9R38/8 160 2060 275/80R18 240 1400
340/85R38
160
2060 13.6R24 IND 330 2585
230/95R48
320
2240 14.9R24 IND 330 3090
13.6R24/12 IND
330
2585 13.6---24/10 FOR 250 1790
18.4R34 IND 290 4850 14.9---24/14 FOR 300 1900
16.9R34 IND 290 3935
16.9---34/14 FOR 260 3025
18.4---34/14FOR
260
3730
When using twin---mounted wheels note the following:
--- the loading on these two wheels together can be multiplied by 1.76 of the permissible loading on one wheel.
--- using twin---mounted wheels is for decreasing the surface pressure, not for obtaining better side support
--- do not exceed tyre/tire size stated for the model, see table J 3, when using dual/extension wheels
--- the track width of the inner wheels has to be adjusted to minimum value.
--- when needed limited turning angle