Vertiv | SmartCabinet | User Manual 18
System Installation
There are two accessory boxes (placed in the cabinet for delivery) of the same structure and dimensions, as
shown in Figure 2-6.
Figure 2-6 Accessory box
The dimensions and range of the accessory box are shown in the following table under Table 2-6.
Table 2-6
Dimensions (Units: mm)
Range of weight
(Unit: kg)
H W D
90 530 710 <15 KG
The integrated condenser unit has only one accessory box. The other two standard models of 600mm &
800mm width have two accessory boxes.
The cabinet, closed frames, and the AC indoor unit need to be moved to the vicinity of the installation
site. SmartCabinet, being an equipment with large components, is on the heavier side and needs to be
transported using equipment such as a hand pallet truck or electric forklift.
Figure 2-7 depicts the schematic diagram of a hand pallet truck and an electric forklift.
Figure 2-7 Hand Pallet Truck & an Electric Forklift
To Next Page
Loading...
