Introduction
VF1807090083 EN revision 13
1.4. Acts, regulations and standards
The acts, regulations and standards provided herein are valid in the European Union. The instrument meets
and follows the directives and government regulations referred to in Tab. 1 as well as the harmonized technical
standards referred to in Tab. 2.
Identification/year of publication
LV electrical equipment safety
Electromagnetic compatibility
Tab. 1 EU guidelines and Government Orders
Radiation protection instrumentation. Installed personnel surface contamination monitoring
assemblies
Radiation protection instrumentation. Alpha, beta and alpha/beta (beta energy > 60 keV)
contamination meters and monitors
Reference sources - Calibration of surface contamination monitors - Alpha-, beta- and photon
emitters.
Quantities and units - Part 10: Nuclear reactions and ionizing radiations
Determination of the detection limit and decision threshold for ionizing radiation
measurements. Fundamentals and application to counting measurements without the
influence of sample treatment
Recommended practices for seismic qualification of electrical equipment of the safety system
for nuclear generating stations
Environmental testing: Tests - Test Ea and guidance - Vibration (sinusoidal)
Environmental testing: Tests - Test Ea and guidance - Shock
Corrosion of metals and alloys - Determination of bimetallic corrosion in atmospheric
exposure corrosion tests
Low voltage electrical installations - Revisions
Low voltage electrical installations - Protection for safety - Protection against electric shock
Electrotechnical and engineering regulations. Inspection and testing of electrical installations
Information technology equipment – Radio disturbance characteristics – Limits and methods
of measurement
Electromagnetic compatibility: Generic standards - Immunity for residential, commercial and
light-industrial environments
Electromagnetic compatibility: Generic standards - Immunity for industrial environments
Electromagnetic compatibility: Generic standards - Emission standard for residential,
commercial and light-industrial environments
Electromagnetic compatibility: Generic standards - Emission standard for industrial
environments
Tab. 2 Technical standards