Occupational safety, fire protection and environmental impacts
VF1807090083 EN revision 14
2.
Occupational safety, fire protection and environmental
impacts
2.1. Occupational safety
A summary of measures laid down by legislation and recommended by the producer that should prevent risk
or detriment to human health in work.
2.1.1 Safety signs used in VF, a.s. and their meanings
Attention, electrical equipment.
The appliance is supplied by AC voltage
mains
Do not dispose of with regular
waste.
Do not extinguish with either water or
foam extinguishers!
Warning and safety precautions.
Product compliance with EU
legislation.
Information, recommendations
and comments of the manufacturer.
Do not enter on the stand with the
shoes whose soles can pass through
the grating.
The stainless grating has dimensions
of the holes 30 x 30 mm.
2.1.2 Obligations of the operator
The operator is obliged to ensure the observation of general safety regulations when working with
the instrument.
To provide for the transport of the instrument, the operator is obliged to ensure training for
operating personnel in load lifting and slinging.
Before the instrument is put into service, the operator is obliged to define the competences
of persons for the operation, service, cleaning, regular maintenance, setting and adjustment
to provide and maintain the proper function of the instrument and the safety of persons and
property.
To Next Page
Loading...