Victory 2009 VISION User Manual

114
OPERATION
Operation
Shifting Gears (General)
The gear shift pedal is operated by the left foot. Shift to
a higher gear by lifting the front peg of the pedal with
your toe. Shift to a lower gear by pressing down on the
peg with your toe.
Neutral is located between first and second gear. The
transmission is in neutral when the motorcycle moves
forward or backward freely while the clutch is engaged
(clutch lever released). With the ignition switch in the
ON position, the Neutral indicator illuminates when the
transmission is in neutral.
WARNING
The clutch must be fully disengaged (clutch lever pulled completely toward the
handlebars) before you attempt to shift gears. Forced shifting (shifting without the clutch
disengaged) may damage the engine, transmission, and drive train, causing loss of control
of the motorcycle.
N
1
2
4
3
5
6
(OD)
visionownersmanual.book Page 114 Wednesday, February 13, 2008 4:31 PM

Victory 2009 VISION Specifications

General

Year	2009
Manufacturer	Victory
Model	VISION
Category	Touring
Compression Ratio	9.4:1
Cooling System	Air / oil
Transmission	6-speed
Final Drive	Belt
Front Tire	130/70-R18
Rear Tire	180/60-R16
Engine Type	V-twin, four-stroke
Displacement	1731 cc
Bore x Stroke	101 x 108 mm
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic fork
Rear Suspension	Single
Front Brakes	Dual 300mm discs, 4-piston calipers
Rear Brakes	Single 300mm disc 2 piston caliper
Seat Height	26.5 inches
Fuel Capacity	22.7 liters / 6.0 US gallons
Wheelbase	65.7 inches