Victory 2009 VISION User Manual

212
CLEANING
Cleaning
Polishing the VICTORY Motorcycle
Polished Aluminum Care
When a VICTORY is new, the polished aluminum wheels, hand levers and shifter shine like chrome.
Ultraviolet (UV) rays and oxidation will cause polished aluminum to grow dull, however, if it’s not
properly polished and protected.
Pure VICTORY Awesome Metal Polish will clean, polish and protect these aluminum surfaces. This
metal polish will restore that factory chrome-like shine and leave a protective coating that resists
future oxidation for several months. Pure VICTORY Awesome Metal Polish provides instant results
you must see to believe!
1. Shake the polish container well before using.
2. Apply the product with a terry cotton or microfiber cloth or pad.
3. Rub gently until the black begins to come to the surface or until shine begins to show through the
haze.
4. Allow the product to haze.
5. Remove the haze with a terry cotton or microfiber cloth and buff to a long-lasting chrome-like
shine.
visionownersmanual.book Page 212 Wednesday, February 13, 2008 4:31 PM

Victory 2009 VISION Specifications

General

Year	2009
Manufacturer	Victory
Model	VISION
Category	Touring
Compression Ratio	9.4:1
Cooling System	Air / oil
Transmission	6-speed
Final Drive	Belt
Front Tire	130/70-R18
Rear Tire	180/60-R16
Engine Type	V-twin, four-stroke
Displacement	1731 cc
Bore x Stroke	101 x 108 mm
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic fork
Rear Suspension	Single
Front Brakes	Dual 300mm discs, 4-piston calipers
Rear Brakes	Single 300mm disc 2 piston caliper
Seat Height	26.5 inches
Fuel Capacity	22.7 liters / 6.0 US gallons
Wheelbase	65.7 inches