Victory 2009 VISION User Manual

68
INSTRUMENTS, FEATURES, & CONTROLS
Controls
RIGHT HANDLEBAR CONTROLS
Engine Stop / Run Switch
The engine stop/run switch completes or interrupts
the ignition, starter, and fuel pump circuits.
To complete the circuits, allowing the engine to start
and run, press the lower portion of the engine stop/
run switch (RUN position).
To interrupt the circuits, press the upper portion of
the switch (STOP position). The engine should not
start or run when the switch is in the STOP position.
Use the engine stop/run switch to turn the engine off
under either normal or emergency conditions. Turn
the key OFF after the engine stops.
Run
RIGHT Handlebar Switch
visionownersmanual.book Page 68 Wednesday, February 13, 2008 4:31 PM

Victory 2009 VISION Specifications

General

Year	2009
Manufacturer	Victory
Model	VISION
Category	Touring
Compression Ratio	9.4:1
Cooling System	Air / oil
Transmission	6-speed
Final Drive	Belt
Front Tire	130/70-R18
Rear Tire	180/60-R16
Engine Type	V-twin, four-stroke
Displacement	1731 cc
Bore x Stroke	101 x 108 mm
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic fork
Rear Suspension	Single
Front Brakes	Dual 300mm discs, 4-piston calipers
Rear Brakes	Single 300mm disc 2 piston caliper
Seat Height	26.5 inches
Fuel Capacity	22.7 liters / 6.0 US gallons
Wheelbase	65.7 inches