Victory 2009 VISION User Manual

91
PRE-RIDE CHECKS
Pre-Ride
Check Tires
Tire Pressure
• Normal riding warms the tires and increases the tire air pressure. For an accurate
reading, check the tire pressure before you ride. Adjust tire pressure as required for the
total weight of your intended load. Refer to the tire pressure table on page 176 or the
Tire information Label on the motorcycle located in the left saddlebag.
Tire Condition
• Inspect the tire sidewalls, road contact surface, and tread base for cuts, punctures, and
cracks. Replace damaged tires promptly.
Tire Tread Depth
• Measure the tread depth near the center of the tread on both front and rear tires. See
page 175. Replace any tire with a tread depth of less than 1/16
 (1.7mm).
visionownersmanual.book Page 91 Wednesday, February 13, 2008 4:31 PM

Victory 2009 VISION Specifications

General

Year	2009
Manufacturer	Victory
Model	VISION
Category	Touring
Compression Ratio	9.4:1
Cooling System	Air / oil
Transmission	6-speed
Final Drive	Belt
Front Tire	130/70-R18
Rear Tire	180/60-R16
Engine Type	V-twin, four-stroke
Displacement	1731 cc
Bore x Stroke	101 x 108 mm
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic fork
Rear Suspension	Single
Front Brakes	Dual 300mm discs, 4-piston calipers
Rear Brakes	Single 300mm disc 2 piston caliper
Seat Height	26.5 inches
Fuel Capacity	22.7 liters / 6.0 US gallons
Wheelbase	65.7 inches