Victory 2009 VISION User Manual

95
PRE-RIDE CHECKS
Pre-Ride
Brake Hoses, Hose Connections, & Brake Caliper Seals
Inspect all brake hoses and brake hose connections for dampness or stains from leaking
or dried brake fluid. Tighten any leaking connections to specified torque listed in the
appropriate VICTORY service manual or contact your VICTORY dealer for service.
When checking brake pad friction material thickness (page 96) check each brake caliper
for dampness or stains from leaking or dried brake fluid.
WARNING
Brake system failure could result if fluid is low or if fluid has leaked out of the brake
system. Do not ride the motorcycle if any leaks are present or if there is evidence of
leakage such as dampness or stains from dried fluid.
visionownersmanual.book Page 95 Wednesday, February 13, 2008 4:31 PM

Victory 2009 VISION Specifications

General

Year	2009
Manufacturer	Victory
Model	VISION
Category	Touring
Compression Ratio	9.4:1
Cooling System	Air / oil
Transmission	6-speed
Final Drive	Belt
Front Tire	130/70-R18
Rear Tire	180/60-R16
Engine Type	V-twin, four-stroke
Displacement	1731 cc
Bore x Stroke	101 x 108 mm
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic fork
Rear Suspension	Single
Front Brakes	Dual 300mm discs, 4-piston calipers
Rear Brakes	Single 300mm disc 2 piston caliper
Seat Height	26.5 inches
Fuel Capacity	22.7 liters / 6.0 US gallons
Wheelbase	65.7 inches