15: Configuring DHCP server and DNS (Dnsmasq)
_______________________________________________________________________________________________________
_____________________________________________________________________________________________________
© Virtual Access 2017
GW1000 Series User Manual
Issue: 1.9 Page 119 of 350
Web: Localise queries
UCI: dhcp.@dnsmasq[0].localise_queries
Opt: localise_queries
Defines whether to uses IP address to match the incoming
interface if multiple addresses are assigned to a host name in
/etc/hosts.
Web: Expand hosts
UCI: dhcp.@dnsmasq[0].expandhosts
Opt: expandhosts
Adds a local domain suffix to names served from host files.
Web: No negative cache
UCI: dhcp.@dnsmasq[0].nonegcache
Opt: nonegcache
Enable this to stop caching of negative replies. For example, non-
existing domains.
Web: Strict order
UCI: dhcp.@dnsmasq[0].strictorder
Opt: strictorder
Enable this to query DNS servers in the order of the resolve file.
Web: Bogus NX Domain override
UCI: dhcp.@dnsmasq[0].bogusnxdomain
Opt: list bogusnxdomain
A list of hosts that supply bogus NX domain results. When using
UCI multiple servers should be entered with a space between
them.
Web: DNS server port
UCI: dhcp.@dnsmasq[0].port
Opt: port
Listening port for inbound DNS queries.
Set to 0 to disable DNS functionality.
Web: DNS query port
UCI: dhcp.@dnsmasq[0].queryport
Opt: queryport
Defines fixed source port for outbound DNS queries.
Web: Max DHCP leases
UCI: dhcp.@dnsmasq[0].dhcpleasemax
Opt:dhcpleasemax
Defines the maximum allowed number of active DHCP leases.
Web: Max EDNS0 packet size
UCI: dhcp.@dnsmasq[0].ednspacket_max
Opt: ednspacket_max
Defines the maximum allowed size of EDNS.0 UDP packets in
bytes.
Web: Max concurrent queries
UCI: dhcp.@dnsmasq[0].dnsforwardmax
Opt: dnsforwardmax
Maximum allowed number of concurrent DNS queries.
Table 36: Information table for advanced settings
15.2.5 Active leases
This section displays all currently active leases.
Figure 66: The active leases section