virtual access GW2024P-2 User Manual

22: Configuring a mobile connection
_______________________________________________________________________________________________________
_____________________________________________________________________________________________________
© Virtual Access 2017
GW1000 Series User Manual
Issue: 1.9 Page 165 of 350
Web Field/UCI/Package Option
Description
Web: Name of the new interface
UCI: network.3G=interface
Opt: interface
Allowed characters are A-Z, a-z, 0-9 and _
Web: Protocol of the new interface
UCI: network.3G.proto
Opt: proto
Protocol type. Select LTE/UMTS/GPRS/EV-DO.
Option
Description
Static
Static configuration with fixed address and
netmask.
DHCP Client
Address and netmask are assigned by DHCP.
Unmanaged
Unspecified
IPv6-in-IPv4
IPv6-over-
IPv4
GRE
IOT
L2TP
Layer 2 Tunnelling Protocol.
PPP
PPPoE
PPPoATM
LTE/UMTS/
GPRS/EV-DO
CDMA, UMTS or GPRS connection using an
AT-style 3G modem.
Web: Create a bridge over multiple
interfaces
UCI: network.3G.type
Opt: type
Enables bridge between two interfaces.
Not relevant when configuring a mobile interface.
0
Disabled.
1
Enabled.
Web: Cover the following interface
UCI: network.3G.ifname
Opt: ifname
Select interfaces for bridge connection.
Not relevant when configuring a mobile interface.
Table 56: Information table for the create interface page
Click Submit. The Common Configuration page appears. There are three sections in the
mobile interface common configurations:
Section
Description
General Setup
Configure the basic interface settings such as protocol, service type, APN
information, user name and password.
Advanced Settings
Set up more in-depth features such as initionalization timeout, LCP echo failure
thresholds and inactivity timeouts.
Firewall settings
Assign a firewall zone to the connection.

virtual access GW2024P-2 Specifications

General

Brand	virtual access
Model	GW2024P-2
Category	Wireless Router
Language	English