virtual access GW2024P-2 User Manual

22: Configuring a mobile connection
_______________________________________________________________________________________________________
_____________________________________________________________________________________________________
© Virtual Access 2017
GW1000 Series User Manual
Issue: 1.9 Page 166 of 350
22.2.1.1 Mobile interface: general setup
Figure 90: The common configuration page
Web Field/UCI/Package Option
Description
Web:Status
UCI: n/a
Opt: n/a
Shows the current status of the interface.
Web: Protocol
UCI: network.3G.proto
Opt: proto
Protocol type. Select LTE/UMTS/GPRS/EV-DO.
Option
Description
Static
Static configuration with fixed address and
netmask.
DHCP Client
Address and netmask are assigned by DHCP.
Unmanaged
Unspecified
GRE
IOT
L2TP
Layer 2 Tunnelling Protocol.
PPP
PPPoE
PPPoATM
LTE/UMTS/
GPRS/EV-DO
CDMA, UMTS or GPRS connection using an
AT-style 3G modem.
Web: Service Type
UCI: network.3G.service
Opt: service
Service type that will be used to connect to the network.
gprs_only
Allows GSM module to only connect to gprs
network
lte_only
Allows GSM module to only connect to lte
network
cdma
Allows GSM module to only connect to cdma
network
auto
GSM module will automatically detect the best
available technology code.

virtual access GW2024P-2 Specifications

General

Brand	virtual access
Model	GW2024P-2
Category	Wireless Router
Language	English