EasyManua.ls Logo

Visonic POWERMASTER 10 - Page 54

Visonic POWERMASTER 10
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
D-303222 PowerMaster-10 / PowerMaster-30 Installer's Guide 53
The menu contains several sub-menu options, each covering a group of configurable
features and parameters related to the communication and reporting as follows (see detailed list in Step-3 of the
chart below):
Option Description of Option Features and Parameters Section
Contains configurable features and parameters related to the PSTN
telephone line to which the PowerMaster-10 / PowerMaster-30 is connected.
3.6.2
Contains configurable features and parameters related to the Cellular
connection of the PowerMaster-10 / PowerMaster-30 system.
3.6.3
Contains configurable features and parameters related to Reporting of event
messages to Central Monitoring Stations via telephone, cellular or IP
broadband communication.
3.6.4
Contains configurable features and parameters related to Reporting event
messages to Private Users via telephone or SMS.
3.6.5
Contains configurable features and parameters related to Motion Cameras
for Video Alarm Verification and forwarding of image clips to Central
Monitoring Station and other remote subscribers via e-mail and/or MMS
network.
3.6.6
Contains configurable connection information, access permission and security
codes related to the Upload/Download procedures via PSTN or GPRS.
3.6.7
To enter the menu and to select and configure an option, proceed as follows:
Step 1
Step 2
Step 3
Step
4
Select
"COMMUNICATION"
[1]
Select
Communication
Sub-menu option
[2]
Select the "Communication" Parameter you
wish to configure
[3]
[4]
See
section
3.6.2
3.6.3
(
) These options are
available only to the
"Master Installer"
3.6.4
04.COMMUNICATION
GSM/GPRS FAIL
PSTN FAIL
53:COM.FAIL RPRT
52:AUTO-TST TIME
51:TEL AUTO TEST
47:GSM RETRIES
46:PSTN RETRIES
GSM KEEP ALIVE
GPRS ALWAYS ON
NETWORK ROAMING
GPRS PASSWORD
SIM PIN CODE
01:REPORT EVENTS
02:1st RPRT CHAN
03:2nd RPRT CHAN
04:3rd RPRT CHAN
05:DUAL REPORT
11:RCVR1 ACCOUNT
12:RCVR2 ACCOUNT
16:PSTN/GSM RCV1
GPRS REPORT
GSM REPORT
SMS REPORT
GPRS APN
GPRS USERNAME
DIAL METHOD
LINE PREFIX
AREA CODE SKIP
3:C.S. REPORTING
2:GSM/GPRS/SMS
1:PSTN TEL LINE 04.COMMUNICATION
INSTALLER MODE
04.COMMUNICATION
6:UP/DOWNLOAD
5:MOTION CAMERA
4:PRIVATE REPORT
3:C.S.REPORTING
2:GSM/GPRS/SMS
1:PSTN TEL LINE

Table of Contents

Other manuals for Visonic POWERMASTER 10

Related product manuals