Watlow ez-zone pm - Page 220

Watlow EZ-ZONE
®
PMI Controller • 216 • Chapter 9 Features
Although the PM control now contains the conguration (because the previous discussion fo-
cused on doing the conguration on-line) it is suggested that after the conguration process
is completed that the user save this le on the PC for future use. If for some reason some-
one inadvertently changed a setting without understanding the impact, it would be easy and
perhaps faster to download a saved conguration back to the control versus trying to gure
out what was changed. Of course, there is an option to exit without saving a copy to the lo-
cal hard drive. After selecting Save above, click the "Finish" button once again. The screen
below will than appear. When saving the conguration, note the location where the le will
be placed (saved in) and enter the le name (File name) as well. The default path for saved
les follows:
Users\"Username"\My Documents\Watlow\EZ-Zone Congurator\Saved Congurations
The user can save the le to any folder of choice.