Watlow ez-zone pm - Function Key

Watlow EZ-ZONE
®
PMI Controller • 140 • Chapter 6 Setup Page
Setup Page
Display
Parameter Name
Description
Range Default
Modbus
Relative Ad-
dress
CIP -
Class
Instance
Attribute
hex (dec)
Pro-
fibus
Index
Param-
eter
ID
Data
Type
and
Access
**
t.dL
t.dL
Special Output (1)
Time Delay
If requested power
is 0.0% for longer
than the specified
Time Delay, the
compressor will
shut off.
0 to 9,999 seconds 0 Instance 1
Map 1 Map 2
- - - - 3890
0x87
(135)
1
0x1A
(26)
- - - - 35026 uint
RWES
FUn
SEt
Function Key
LEu
LEv
Function Key (1 to
2)
Active Level
The Function Key
will always power
up in the low state.
Pressing the Func-
tion Key will toggle
the selected action.
high High (37)
LoФІ Low (53)
High Instance 1
Map 1 Map 2
1360 1600
Instance 2
Map 1 Map 2
1380 1620
0x6E
(110)
1 to 2
1
137 10001 uint
RWES
* These parameters/prompts are available in these menus with firmware revisions 11.0 and above.
** R: Read, W: Write, E: EEPROM, S: User Set