Watlow ez-zone pm - Profibus DP

Watlow EZ-ZONE
®
PMI Controller • 150 • Chapter 6 Setup Page
Setup Page
Display
Parameter Name
Description
Range Default
Modbus
Relative Ad-
dress
CIP -
Class
Instance
Attribute
hex (dec)
Pro-
fibus
Index
Param-
eter
ID
Data
Type
and
Access
**
nU.S
nU.S
Communications (2)
Non-volatile Save
If set to Yes all
values written to
the control will be
saved in EEPROM.
The EEPROM allows
for approximately
one million writes.
yEs Yes (106)
no No (59)
No - - - - - - - - - - - - - - - - uint
RWE
Profibus DP
P.Add
P.Add
Communications (2)
Profibus Node Ad-
dress
Set the Profibus ad-
dress for this con-
trol.
0 to 126
126 - - - - - - - - - - - - 17060 - - - -
a.Loc
A.Loc
Communications (2)
Profibus Address
Lock
When set to yes will
not allow address
to be changed using
software. Can be
changed from front
panel.
no No (59)
yES Yes (106)
No - - - - - - - - - - - - 17061 - - - -
stat
Stat
Communications
Profibus DP Status
Current Profibus
status.
rEdy Ready (1662)
rng Running (149)
- - - -
- - - - - - - - - - - - 17062 uint
R
C_F
C_F
Communications (2)
Display Units
Select which scale
to use for tempera-
ture passed over
communications
port 2.
F °F (30)
C °C (15)
°F Instance 2
Map 1 Map 2
- - - - 2990
0x96
(150)
2
6
199 17050 uint
RWE
nU.S
nU.S
Communications (2)
Non-volatile Save
If set to Yes all
values written to
the control will be
saved in EEPROM.
The EEPROM allows
for approximately
one million writes.
yEs Yes (106)
no No (59)
No Instance 2
Map 1 Map 2
2514 2994
96 (150)
2
8
198 17051 uint
RWE
* These parameters/prompts are available in these menus with firmware revisions 11.0 and above.
** R: Read, W: Write, E: EEPROM, S: User Set