12
CHAPTER 1
SAFETY NOTICES
This manual contains necessary information for the correct use of the
CFW-10 Variable Frequency Drive.
This manual has been written for qualified personnel with suitable
training and technical qualification to operate this type of equipment.
The following Safety Notices will be used in this manual:
DANGER!
If the recommended Safety Notices are not strictly observed, it can
lead to serious or fatal injuries of personnel and/or material damage.
ATTENTION!
Failure to observe the recommended Safety Procedures can lead to
material damage.
NOTE!
The content of this manual supplies important information for the
correct understanding of operation and proper performance of the
equipment.
The following symbols may be attached to the product, serving as
Safety Notice:
High Voltages
Components sensitive to electrostatic discharge. Do not touch
them without proper grounding procedures.
Mandatory connection to ground protection (PE)
Shield connection to ground
DANGER!
Only qualified personnel should plan or implement the installation,
start-up, operation and maintenance of this equipment. Personnel
must review entire Manual before attempting to install, operate or
troubleshoot the CFW-10.
These personnel must follow all safety instructions included in this
Manual and/or defined by local regulations.
Failure to comply with these instructions may result in personnel injury
and/or equipment damage.
1.3 PRELIMINARY
RECOMMEN-
DATIONS
1.2 SAFETY NOTICE
ON THE
PRODUCT
1.1 SAFETY
NOTICES IN THE
MANUAL
To Next Page
Loading...
