Appliances
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
WINDSOR
4•107
Multiple Sequence Cooking:
If sequential cooking times with varied power levels are desired, press the
POWER LEVEL pad and select desired power level. Use the number pad to
enter cook time for the first interval. Press POWER LEVEL pad again,
select desired power level, then enter cook time for the next time period.
Press the START/TOUCH-ON pad to begin sequential cooking. The
microwave can hold up to four sequential cook time periods. If full power is
desired in any of the time periods, skip the power level step and 100% power
is automatically selected.
Keep Warm:
Press the KEEP WARM pad during cooking time to automatically keep
food warm for up to 30 minutes after cooking time has expired. To use this
feature after cooking time has expired or after the food has been removed and
reheating is desired, place the food back into oven and press the KEEP
WARM pad.
Defrosting can be done on manual time selection or use the microwave’s
CompuDefrost.
Manual Defrost:
Press the POWER LEVEL pad. Select number 3 for defrost power. Enter
desired defrost time. Be sure to stir or break food apart at regular intervals.
CompuDefrost:
The microwave has automated defrost programs for different foods and
weights. Press the COMPUDEFROST pad to enter this mode. Press
COMPUDEFROST again to select between ground meat, steak or chicken.
Use number pads to enter weight of food being defrosted. Press
START/TOUCH-ON to begin defrost cycle
Sensor Cooking:
The microwave has electronic sensors that sense moisture or humidity
given off by the food during the cooking process. Electronic sensors will be
affected if room temperature exceeds 95° F. To adjust the sensor cooking
mode to allow for more or less cooking time, press the SENSOR COOK
pad. Press the POWER LEVEL pad once to increase cooking time or twice
to decrease cook time.
To use the sensor cooking mode, press the SENSOR COOK pad. Select
the number or food desired from the library listed adjacent to the SENSOR
COOK pad. Press the START/TOUCH-ON pad to begin sensor cooking.
To Next Page
Loading...