Woodward GCP-30 Series User Manual

Manual 37365A GCP-30 Series Packages - Genset Control
© Woodward Page 19/179
11.) A window will appear with all the tunable parameters in it. Move the cursor over the numbers for the pass-
word and double click.
12.) Enter the password for code level CS 2 (Parameter 2).
13.)
Close the parameterization window.
14.) Select "Devices" from the tool bar and "Load language…" from the drop down menu or click on the letter L
icon.

Woodward GCP-30 Series Specifications

General

Brand	Woodward
Model	GCP-30 Series
Category	Controller
Language	English