Basic Configuration DRS5116
Wren
2003. 09. 06 (v 1.0)
103
16.8.6.4. NTP Setting
NTP (Network Time Protocol) makes the time of Network devices synchronize. They are composed of
a central server for supplying standard time via Network and a client for receiving the synchronized
time with connecting the server
.
NTP Mode
Set the DRS5116’s NTP mode between Client and Server.
NTP Server Loc.
The NTP Server Loc is possible to set after setting the NTP Mode as “Client”. Set whether the NTP
server is on the Local Network or Internet (Public).
NTP Local Server IP
The NTP Local Server IP is possible to set after setting NTP Server Loc. as “Local”. Set the server’s IP
address. Set the NTP server’s IP address on the Local Network or the IP address of DRS5116 that is set
as server in NTP mode.
Interval (min)
Set a synchronizing interval.
To Next Page