Calibration and Troubleshooting
6-28 M370046-01
Troubleshooting for Operators
Refer to Table 6-1 to ensure that the power supply is configured and
connected for normal operation. If you require any further
troubleshooting assistance, call your service technician. See “Contact
Information” on page iii.
Table 6-1
Troubleshooting
Symptom Check Further Checks and Corrections
The power supply is not
operating. FLA FAIL is
displayed.
Flash memory check sum error. Do a reset. See page 3–38.
Important:
The power supply will boot with default options and calibration
values for the 6 V-110 A model.
To Next Page
Loading...
