Network Connectivity
Xerox
®
B215 Multifunction Printer
User Guide
65
Configuring DNS Settings
Domain Name System (DNS) is a system that maps host names to IP addresses.
1. At the printer control panel, touch Device
Network
TCP/IP Settings.
2. Touch DNS Configuration.
a. Touch Host Name, type a host name, then touch
Confirm.
For the following steps, if DHCP is enabled, the Domain Name and DNS Servers cannot be set
manually.
b. Touch Domain Name, then touch the Requested Domain Name field. To type the fully
qualified domain name, use the touch screen keypad. Touch
Confirm.
3. Touch X.
4. Touch DNS Servers.
a. Touch Primary DNS Server, type the server address, then touch
Confirm.
b. Touch Secondary DNS Server #1, type the server address, then touch
Confirm.
5. Touch X.
6. To return to the home screen, press the Home button.
Configuring TCP/IP Settings Using Xerox
®
CentreWare
®
Internet Services
If your printer has a valid network address, you can configure TCP/IP settings in Xerox
®
CentreWare
®
Internet Services. For details, refer to Assigning a Network Address.
Configuring IPv4
You can use IPv4 or IPv6 in addition to or in place of the other.
1. In Xerox
®
CentreWare
®
Internet Services, click Properties Connectivity Protocols.
2. Click TCP/IP.
3. For Protocol, select Enabled.
4. For Host Name, type a unique name for your printer.
5. For IP Address Resolution, select an option. Fields that appear depend on the option that you
select.
• STATIC: This option disables dynamic addressing and allows you to type a static IP address.
Type the Machine IP Address, Subnet Mask, and Gateway Address.
• BOOTP: This option allows the printer to obtain an IP address from a BOOTP server that does
not respond to DHCP requests.
• DHCP: This option allows your DHCP server to assign an IP address to the printer. Dynamic
DNS Registration is enabled.
6. For Domain Name, type the fully qualified domain name of your authentication server.
7. For DNS Configuration, type the IP address for up to three servers.
8. To send a release request to the DHCP and DNS servers, for Dynamic DNS Registration, select
Enabled. If the servers grant the request, when the printer is powered off, the current IP address
and dynamic DNS name are released.
To Next Page
Loading...
