Xerox C310 - ThinPrint; USB

THINPRINT
MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
EEnnaabbllee TThhiinnPPrriinntt
Off
On*
Print using ThinPrint.
PPoorrtt NNuummbbeerr
4000–4999 (4000*)
Set the port number for the ThinPrint server.
BBaannddwwiiddtthh ((bbiittss//sseecc))
100–1000000 (0*)
Set the speed to transmit data in a ThinPrint
environment.
PPaacckkeett SSiizzee ((kkbbyytteess))
0–64000 (0*)
Set the packet size for data transmission.
USB
Note: This menu appears only in some printer models.
MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
PPCCLL SSmmaarrttSSwwiittcchh
Off
On*
Set the printer to switch to PCL emulation when a print
job received through a USB port requires it, regardless
of the default printer language.
If PCL SmartSwitch is off, then the printer does not
examine incoming data and uses the default printer
language specified in the Setup menu.
PPSS SSmmaarrttSSwwiittcchh
Off
On*
Set the printer to switch to PS emulation when a print
job received through a USB port requires it, regardless
of the default printer language.
If PS SmartSwitch is off, then the printer does not
examine incoming data and uses the default printer
language specified in the Setup menu.
JJoobb BBuuffffeerriinngg
Off*
On
Temporarily store jobs on the printer hard disk before
printing.
This menu item appears only when a hard disk
installed.
Xerox
®
C310 Color Printer User Guide 121
Use the Printer Menus