NOTIFICATIONS — DO NOT USE
MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
SSuupppplliieess
Show Supply Estimates
Show estimates*
Do not show estimates
Show the estimated status of the supplies.
SSuupppplliieess
CCuussttoomm SSuuppppllyy NNoottiiffiiccaattiioonnss
• Notification Settings — Custom Supply Levels
– On
– Off
• BBllaacckk CCaarrttrriiddggee
– Custom Message
– On
– Off
– Default
– Alternate
Custom Notifications — Indicates the list of
notifications set with the Percent Remaining and
Behavior.
• CCyyaann CCaarrttrriiddggee
– Custom Message
– On
– Off
– Default
– Alternate
Custom Notifications — Indicates the list of
notifications set with the Percent Remaining and
Behavior.
• MMaaggeennttaa CCaarrttrriiddggee
– Custom Message
– On
– Off
– Default
– Alternate
You can configure custom supply notifications. Settings
and modes are defined on this page. Modes include:
• OOffff: The normal printer behavior for all supplies will
occur.
• SSNNMMPP OOnnllyy: The printer will only generate an
SNMP alert when this state is reached. There will be
no indication on the panel of the state. The state
will appear on the menus page and status page.
• EE--mmaaiill: The printer will only generate an e-mail
when this state is reached. There will be no
indication on the panel of the state. The state will
appear on the menus page and status page.
• WWaarrnniinngg: The printer will not stop when the state is
reached, however a warning message will appear
on the panel and an e-mail will be generated.
• CCoonnttiinnuuaabbllee SSttoopp: The printer will stop when the
state is reached and the user can press a button to
continue printing. If e-mail notification for supply
events is enabled, an e-mail will be generated.
• NNoonn--CCoonnttiinnuuaabbllee SSttoopp: The printer will stop when
the state is reached and the user will not be able to
press any buttons to continue printing. The supply
must be replaced at this time to continue printing.
If e-mail notification for supply events is enabled,
an e-mail will be generated. For some supplies, Hard
Stop is the only choice at empty because physical
damage will occur if printing were to continue.
Xerox
®
C310 Color Printer User Guide 75
Use the Printer Menus