Xerox C310 - Page 85

MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
Off*
On
PPrriinntt CCoonnffiigguurraattiioonn
Color Trapping
Off
1
2*
3
4
5
Enhance the printed output to compensate for mis-
registration in the printer.
PPrriinntt CCoonnffiigguurraattiioonn
Font Sharpening
0–150 (24*)
Set a text point-size value below which the high-
frequency screens are used when printing font data.
For example, if the value is 24, then all fonts sized 24
points or less use the high-frequency screens.
DDeevviiccee OOppeerraattiioonnss
Quiet Mode
Off*
On
Set the printer to operate in Quiet Mode.
Enabling this setting slows down the printer
performance.
DDeevviiccee OOppeerraattiioonnss
Panel Menus
Off
On*
Enable access to the control panel menus.
DDeevviiccee OOppeerraattiioonnss
Safe Mode
Off*
On
Set the printer to operate in a special mode, in which it
attempts to continue offering as much functionality as
possible, despite known issues.
For example, when set to On and the duplex motor is
nonfunctional, the printer performs one-sided printing
for a two-sided print job.
DDeevviiccee OOppeerraattiioonnss
Clear Custom Status
Erase user-defined strings for the Default or Alternate
custom messages.
DDeevviiccee OOppeerraattiioonnss
Clear all remotely-installed messages
Erase messages that were remotely installed.
DDeevviiccee OOppeerraattiioonnss Show existing error messages on the display after the
Xerox
®
C310 Color Printer User Guide 85
Use the Printer Menus