Xerox C310 - Page 99

MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
• This menu item activates vertical escapement that
causesthe selected number of requested lines to
print between the default margins of the page.
• 60 is the U.S. factory default setting. 64 is the
international factory default setting.
PPCCLL55 MMiinniimmuumm LLiinnee WWiiddtthh
1–30 (2*)
Set the initial minimum stroke width.
• Jobs printed in 1200 dpi use the value directly.
• Jobs printed in 4800CQ use half the value.
PPCCLLXXLL MMiinniimmuumm LLiinnee WWiiddtthh
1–30 (2*)
AA44 WWiiddtthh
198mm*
203mm
Set the width of the logical page on A4-size paper.
Logical page is the space on the physical page where
data is printed.
AAuuttoo CCRR aafftteerr LLFF
Off*
On
Set the printer to perform a carriage return after a line
feed control command.
Carriage return is a mechanism that commands the
printer to move the position of the cursor to the first
position on the same line.
AAuuttoo LLFF aafftteerr CCRR
Off*
On
Set the printer to perform a line feed after a carriage
return control command.
TTrraayy RReennuummbbeerr
Assign MP Feeder
Assign Tray [x]
Assign Manual Paper
Assign Manual Envelope
Configure the printer to work with a different print
driver or custom application that uses a different set of
source assignments to request a given paper source.
Choose from the following options:
Off*—The printer uses the factory default paper source
assignments.
None—The paper source ignores the Select Paper Feed
command.
0–199—Select a numeric value to assign a custom
value to a paper source.
The multipurpose feeder is available only in some
printer models.
TTrraayy RReennuummbbeerr
View Factory Defaults
Show the factory default value assigned for each paper
source.
Xerox
®
C310 Color Printer User Guide 99
Use the Printer Menus